Size the frame around the assembled wood
A contour interval describes the real land that each layer represents. A wood sheet has a manufactured thickness that varies slightly across a batch. The frame surrounds the sum of those sheets, the backing and any spacing above the highest point. A frame cut from the ideal terrain scale alone can be too shallow after glue, finish and small thickness variations accumulate.
A practical mock-up takes little material. Stack ten offcuts, hold them under light even pressure and measure the total across the stack. Divide by ten for the average thickness. Compare that result with a measurement of one sheet. The longer stack makes a small variation easier to see and approximates the way the parts will sit together. Use a corresponding sample when evaluating adhesives, since a thick glue line also contributes to the finished height.
Physical transitions matter more than the number of visible lines. Near a summit, consider how a small disconnected island will be held during sanding and positioning. Along a cliff several levels can expose nearly vertical end grain. Plan where the eye will meet these edges when the map is hanging, and orient the best face of the wood consistently before cutting.
How the Glowforge artwork separates operations
| Parameter | Specification |
| Operation grouping | Separate colors |
|---|
| Outline operation | Cut |
|---|
| Surface marks | Engrave |
|---|
| Cut geometry | Stroked path |
Worked examples
Comparing two nominal wood thicknesses
A ten-sheet stack made from exactly three millimeter birch stands 30 millimeters tall before glue. Ten sheets of exactly one-eighth-inch basswood stand 31.75 millimeters tall. That 1.75 millimeter difference can change the fit in a frame. Measure several sheets from the purchased batch and use their average for the estimate.
A light-colored mountain front
A model with a pale exposed face can show soot or adhesive at narrow ridges. Assemble one short stack using offcuts, the intended mask and the chosen finish. Examine the exposed contour edges under the display lighting. The rehearsal helps distinguish a geometric registration error from variations in veneer or finish.
A piece left behind in the sheet
A high layer can consist of a main ridge and a separate tiny hill. Count both components against the slice before removing the waste. Mark their relative positions using a template or the visible outline of the surface below. A missing hill may be hard to notice once the model is framed.
Working procedure
- Characterize the material. Measure the supplied wood near several sheet edges and away from any compressed corners. Note the actual thickness and the direction of visible grain. Select only material known to be suitable for your machine. Use the measured value to estimate assembled height, including backing and space for the display frame.
- Check the terrain footprint. Choose an area and scale that yield a practical size for the usable bed. Use a computed reference width after import into the Glowforge workspace. Check narrow summits at this final size. If a feature becomes fragile, revisit the model scale or interval before adding changes to individual cut paths.
- Inspect each print step. Identify the terrain outline, registration features and labels in the SVG. Separate colors give the app a way to present different operations. Set the intended cut or engraving behavior manually and check that marks will land on the correct face. Confirm dimensions again after moving or arranging pieces.
- Dry-stack before bonding. Lay out parts in manifest order from the broad base to the highest level. Test the alignment on pins and look along the ridge for cumulative rotation. Mark the parts that need separate placement, then follow the adhesive and finish instructions for the actual material. Check that the completed stack still fits its frame.
When to use this workflow
A framed landscape commission
A repeatable sheet count and a measured stack height help a frame maker size the recess. Provide the model width, expected depth and visible face orientation with the order. A trial corner can reveal whether veneer color and exposed edges complement the frame finish before the full terrain is assembled.
Comparing timber choices
Cut the same small set of representative slices in birch and basswood. Compare the ability to hold a narrow spur, the appearance of the edge and the stability of the stacked layers. Keep the SVG dimensions and viewing angle constant so the comparison reflects the materials.
Technical questions
Can I treat one-eighth-inch basswood as exactly 3 mm?
One eighth of an international inch equals 3.175 millimeters. Nominal wood dimensions can also differ from the actual batch. A single sheet makes the difference look small, but it accumulates in a stack. Use measured values when fitting a finished map inside a precise frame.
Does changing plywood thickness change the terrain footprint?
The horizontal footprint comes from the site extent and the model scale. Thickness changes the physical rise per represented level. A thicker board can make the relief more pronounced while leaving the cut outline the same size. Review the vertical effect before replacing the specified material.
How should I assign different Glowforge steps?
Recognize the outline, pin features and identification marks by geometry and color. Review their processing choices individually in the app. An SVG stroke suitable for a through-cut can accidentally be assigned to a score, so inspect the operation list before beginning a material test.
How can I make the grain direction consistent across a wood map?
Mark the preferred visible direction in your assembly notes and orient the slices accordingly when arranging them. Preserve the registration geometry with each moved piece. For isolated island pieces, mark their backs or retain a placement template until the glue-up is complete.